Worktop with zinc-finished steel cladding
Material: ChipboardTop surface: Zinc coated sheet steel 2 mm
Bottom side: HPL laminate surface layer
Edges: Veneered edge
Front edge: sheet steel 'U' profile edging
Rear edge: sheet steel 'L' profile edging
Available thicknesses: 30, 40 mm
Colour: Zinc plated
Data: Sheet steel, hot-dip galvanized, in accordance with EN 10142, tested to EN 10204
The "Classic" range of Bott Workshop equipment has now been discontinued
and has been replaced with our new ranges at www.sac-bottverso.com
or www.sac-cubio.co.uk. Alternatively, please call us on 01794 835615 or email us at enquiries@sac-bott.com for all your Workshop and Storage Equipment requirements.
| Click to Enlarge | Part No. | Description | |||
|---|---|---|---|---|---|
) |
Dimensions: 1500 X 700 X 30mm |
||||
) |
Dimensions: 2000 X 700 X 30mm (Image shows cut through worktop) |
||||
 |
|||||
) |
Dimensions: 750 X 700 X 40mm |
||||
) |
Dimensions: 1500 X 700 X 40mm (Image shows cut through worktop) |
||||
) |
Dimensions: 2000 X 700 X 40mm |
||||
|
|||||
) |
Dimensions: 1500 X 700 X 50mm (Image shows cut through worktop) |
||||
) |
Dimensions: 2000 X 700 X 50mm |
||||
|
|||||
) |
Dimensions: 1500 X 900 X 30mm (Image shows cut through worktop) |
||||
) |
Dimensions: 2000 X 900 X 30mm |
||||
|
|||||
) |
Dimensions: 1500 X 900 X 40mm (Image shows cut through worktop) |
||||
) |
Dimensions: 2000 X 900 X 40mm |
||||
|
|||||
Colours other than blue may have an extended lead time. To see colour options click here. |
|||||
){kind=link}